GOOGLE TIPS AND TRICKS

Utilizing search engines
So much information is on the web, its mind boggling. Thankfully we have search
engines to sift through them and catagorize them for us. Unfortunatly, there is still so
much info that even with these search engines, its often a painstakingly slow process
(something comparable to death for a hacker) to find exactly what you're looking for.

Lets get right into it.

I use google.com as my primary search engine because it presently tops the charts as far as
the sites that it indexes which means more pertinent info per search.

1. Page translation.
Just because someone speaks another language doesn't mean they dont have anything useful to say. I use translation tools like the ones found at

http://babelfish.altavista.com
and

http://world.altavista.com
to translate a few key words I am searching for. Be specific and creative because these tools arent the most accurate things on the planet.

2. Directories.
These days everything is about $$$. We have to deal/w SEO (search engine optimization) which seems like a good idea on paper until you do a search for toys and get 5 pornsites in the first 10 results. Using a sites directory will eliminate that. You can narrow your search down easily by looking for the info in specific catagories. (PS google DOES have directories, they're at: directory.google.com)

3. Here are some tips that google refers to as "advanced"

A. "xxxx" / will look for the exact phrase. (google isnt case sensitive)
B. -x / will search for something excluding a certain term
C. filetype:xxx / searches for a particular file extention (exe, mp3, etc)
D. -filetype:xxx / excludes a particular file extention
E. allinurl:x / term in the url
F. allintext:x / terms in the text of the page
G. allintitle:x / terms in the html title of that page
H. allinanchor:x / terms in the links

4. OR
Self explanatory, one or the other... (ie: binder OR joiner)

5. ~X
Synonyms/similar terms (in case you can't think of any yourself)

6. Numbers in a range.
Lets say you're looking for an mp3 player but only want to spend up to $90. Why swim through all the others? MP3 player $0..$90 The 2 periods will set a numeric range to search between. This also works with dates, weights, etc

7. +
Ever type in a search and see something like this:
"The following words are very common and were not included in your search:"
Well, what if those common words are important in your search? You can force google to search through even the common terms by putting a + in front of the denied word.

8. Preferences
It amazes me when I use other peoples PCs that they dont have their google search preferences saved. When you use google as much as I do, who can afford to not have preferences? They're located on the right of the search box, and have several options, though I only find 2 applicable for myself...
A. Open results in new browser
B. Display 10-100 results per page. (I currently use 50 per page, but thats a resolution preference, and 5X's the default)

9. *
Wildcard searches. Great when applied to a previously mentioned method. If you only know the name of a prog, or are looking for ALL of a particular file (ie. you're DLing tunes) something like *.mp3 would list every mp3.

10. Ever see this?
"In order to show you the most relevant results, we have omitted some entries very similar to the X already displayed. If you like, you can repeat the search with the omitted results included." The answer is YES. yes yes yes. Did I mention yes? I meant to.

11. Search EVERYWHERE
Use the engine to its fullest. If you dont find your answer in the web section, try the group section. Hell, try a whole different search engine. Dont limit yourself, because sometimes engines seem to intentionally leave results out.
ex. use google, yahoo, and altavista. search the same terms... pretty close, right? Now search for disney death. Funny, altavista has plenty of disney, but no death...hmmm.

If you've read this far into this tutorial without saying, "Great, a guy that copied a few google help pages and thinks its useful info" then I will show you WHY (besides accuracy, speed, and consistancy finding info on ANYTHING) its nice to know how a search engine works. You combine it/w your knowledge of other protocol.

Example:
Want free music? Free games? Free software? Free movies? God bless FTP! Try this search:
intitle:"Index of music" "rolling stones" mp3
Substitute rolling stones/w your favorite band. No? Try the song name, or another file format. Play with it. Assuming SOMEONE made an FTP and uploaded it, you'll find it.

For example....I wanted to find some Sepultura. If you never heard them before, they're a Brazilian heavy metal band that kicks ass. I started with this:
intitle:"Index of music" "Sepultura" mp3 <-- nothing
intitle:"Index of música" "Sepultura" mp3 <-- nothing
intitle:"Index of musica" "Sepultura" mp3 <-- not good enough
intitle:"Index of music" "Sepultura" * <-- found great stuff, but not enough Sepultura

At this point it occurs to me that I may be missing something, so I try:
intitle:"index of *" "sepultura" mp3 <-- BANG!
(and thats without searching for spelling errors)
Also try inurl:ftp

I find that * works better for me than trying to guess other peoples mis-spellings.

The same method applies for ebooks, games, movies, SW, anything that may be on an FTP site.

I hope you enjoyed this tutorial, and I saw that recently a book and an article was written on the very same topic. I havn't read them as of yet, but check em out, and get back to me if you feel I missed something important and should include anything else.

intitle:"index of" "google hacks" ebook


Ps. I've said it before, I'll say it again... BE CREATIVE.
You'll be surprised what you can find.

Data Capacity of CD

Data Capacity of CDs

Abstract
You can fit on a S/VCD without overburning:
- approx. 735 MB of MPEG data onto a 74min/650MB disc
- approx. 795 MB of MPEG data onto an 80min/700MB disc

You can fit on a CD-ROM without overburning:
- approx. 650 MB of data onto a 74min/650MB disc
- approx. 703 MB of data onto an 80min/700MB disc

----------------------------------------------------------------

Introduction
Let us ignore for now the terms of megabyte for CD capacity and try to understand how the data is stored on a CD.

As well all know, the data is stored digitally as binary data. This means, however the actual information is actually kept on the disc, this information is in the form of "1"s and "0"s. Physically, the information on a CD is as pits on a thin sheet of metal (aluminium).

An a CD-R disc, the data is physically on an organic dye layer which simulates the metal layer on a real pressed CD.

----------------------------------------------------------------

How is the information structured
Now, on the CD, the information isn't just organised from beginning to end willy-nilly. Otherwise, it would be really hard to find a useful piece of information on the CD.

Rather, the information is organised in sectors. Consider a sector as like a page in a book. Just like you are able to quickly find something in a book if you know the page number, you can quickly find something on a CD if you know the sector number.

Now, remember that the CD was original made to hold audio data. It was decided, that the CD would would 75 sectors per second of audio. Although I cannot guess where this number comes from, it is quite appropriate for the audio CD. It means that you can "seek" an audio CD accurately to 1/75th of a second -- which is more than enough for consumer purposes.

Now, with this in mind, we can work out the total data capacity of user data for 1 sector.

----------------------------------------------------------------

The total data capacity of user data of 1 sector on a CD
CD audio uses uncompressed PCM stereo audio, 16-bit resolution sampled at 44.1 kHz.

Thus 1 second of audio contains:
16 bits/channel * 2 channels * 44100 samples/second * 1 second
= 1411200 bits
= 176400 bytes

Since there are 75 sectors per second
1 sector
= 176400 bytes / 75
= 2352 bytes

One sector on a CD contains 2352 bytes max.

----------------------------------------------------------------

The concept of different MODES and FORMS of burning
Now, audio CD was well and good, but the medium would become much more useful if you could store other data on the disc as well. This became to be know as CD-ROM of course.

Now, the audio-CD uses the ENTIRE sector for audio data.

However, for CD-ROMs this caused a problem. Simply, CDs and the CD reading mechanisms were not 100% faultless. That is, errors (indeed frequent errors) could be made during the reading. For audio CDs, this does not matter as much as you could simply interpolate from the adjacent audio samples. This will obviously NOT DO for data CDs. A single bit error could lead to a program being unexecutable or ruin an achive file.

Thus, for CD-ROMs, part of each sector is devoted to error correction codes and error detection codes. The CD-R FAQ has the details, but in effect, only 2048 bytes out of a total of 2352 bytes in each sector is available for user data on a data CD.

This burning mode is either MODE1 or MODE2 Form1.

----------------------------------------------------------------

MODE2 Form2 sectors of VCDs and SVCDs
Now, for VCDs and SVCDs, the video tracks do not necessarily require the robust error correction as normal data on a CD-ROM. However, there is still some overhead per sector that is used for something other than video data (e.g., sync headers).

S/VCDs video tracks are burnt in what is called MODE2 Form2 sectors. In this mode, only 2324 bytes out of a total of 2352 bytes in each sector is available for user data.

This is MUCH MORE than for CD-ROMs, but still less per sector than audio CD.

----------------------------------------------------------------

The disc capacities of CD-ROMs, audio-CDs and VCDs
Now, obviously what ultimately determines the capacity of a disc is the total number of sectors it contains. This is similar to the total number of pages in a blank exercise book (if you recall the book analogy).

The secondary determinant is the burning mode of the disc.

For audio CDs, it is as if you could fill each page from top to bottom with audio data as the entire sector is used for audio data.

For CD-ROMs, it is as if you need to first rule a margin and then leave the bottom part of each page for footnotes (headers + ECC + EDC). The amount of text you can actually write per page is then less due to these other constraints.

For S/VCDs, we still need to rule a margin on the page, but we don't have to worry about the footnotes (headers). We can fit MORE text than a CD-ROM, but less than an audio-CD.

Now remember, 1 second on a CD = 75 sectors.

Thus:
- 74 min CD = 333,000 sectors
- 80 min CD = 360,000 sectors


Data capacity in Mb for an audio-CD
74 min
= 333,000 sectors * 2352 bytes / sector
= 783216000 bytes
= 746.9 Mb

80 min
= 360,000 sectors * 2352 bytes / sector
= 846720000 bytes
= 807.5 Mb


Data capacity in Mb for a CD-ROM
74 min
= 333,000 sectors * 2048 bytes / sector
= 681984000 bytes
= 650.4 Mb

80 min
= 360,000 sectors * 2048 bytes / sector
= 737280000 bytes
= 703.1 Mb


Data capacity in Mb for a S/VCD
74 min
= 333,000 sectors * 2324 bytes / sector
= 773892000 bytes
= 738.0 Mb

80 min
= 360,000 sectors * 2324 bytes / sector
= 836640000 bytes
= 797.9 Mb

----------------------------------------------------------------

Conclusions
As you can see, the often quoted capacities of 650MB and 700MB refer to CD-ROM capacities.

Due to the fact that S/VCDs use a different burning mode where MORE of each sector is available as user data, the relatively capacities are HIGHER.

Now, since S/VCDs are not composed of PURELY video tracks and have some unavoidable overheads, the actually total capacity left for video tracks is a few Mb less for each disc (about 735 Mb for 74min discs and 795 Mb for 80min discs). This is where the often quoted capacities of 740MB and 800MB come from. They are quite accurate.

All these capacities are available BEFORE overburning. Overburning is where you burn MORE sectors than the disc is rated for. If you overburn, you can typically achieve about 1-2 minutes of additional capacity (depending on your drive and media).

----------------------------------------------------------------

WHY PC CRASH 10 REASONS

10 reasons why PCs crash U must Know:

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict:

The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram:

Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings:

Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives:

After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors:

Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses:

Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers:

The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software:

A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating:

Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems:

With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

How to see administrator account in windows XP

Once you have created regular user accounts, the default Administrator account vanishes from the Welcome screen, which you see when the computer starts up. Press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard logon dialog. You can log on as Administrator from here. To switch among accounts, just click the Log Off button on the Start menu. You'll then see the Log Off Windows dialog box. Click the Switch User button, and you'll be taken to the Welcome screen where you can select and log on to other accounts.

How to improve Dialup connection speed

You can't assume that just because you connected at a speed like 48.3KBps that you will stay there. Today's modems automatically fall back to a lower speed if the line noise is too high to maintain a faster connection, but sometimes they fall back too soon or too far.

Here's how to do it:


Click Start the button.
Select Settings.
Click Control Panel.
Double-click on the Modems icon.
Select your modem.
Click the Properties button.
Click the Connections tab.
Click the Advanced button.
In the "Extra settings" field, type S36=7
Click OK to save your settings.


This will force your modem to try to stay connected at high speeds in two different ways before dropping back to an asynchronous mode with auto speed buffering.

How to search all files in windows xp

When you perform a search for a file in Windows XP. The default setting is for XP to ONLY return files in the "Search Results" pane - when they are registered file types to a program on your PC.

In other words if you are looking for a file that is NOT registered with an application on your PC, it will not be found using the default search settings.

However, you can turn off the default by a quick Tweak of the registry!

Open the Registry editor (type regedit from the Run command) and navigate to:

HKEY LOCAL MACHINE\ SYSTEM\ CurrentControlSet\ Control\

ContentIndex

Double-Click the value named:

FilterFilesWithUnknownExtensions

..and change the value from 0 to 1

Exit the registry editor and reboot!

How to Rename multiple files together in XP

                                   

XP lets you rename files in bulk by simply selecting multiple files within Windows Explorer and pressing the F2 key. When you use this feature, the OS applies the name you enter to the first file and applies the same name with a number in parentheses to the other files you selected (the file extensions remain unchanged).

For example, if you select the following files,

* sunset.xls

* river.jpg

* friends.gif

and rename the first file (sunset.xls) to SoD.xls, XP renames the remaining files as follows:

* SoD (1).xls

* SoD (2).jpg

* SoD(3).gif 

How to change windows start button

First you need a tool called "Resource Hacker". This free program allows you to change
 resources in any .exe file such as "Explorer.exe", which includes the [Start] button's Label.
 You can visit Download.com and search there for "Resource Hacker".
After you download it, follow the guide here:

Step 1:

A - Run "Resource Hacker" and open the file "%windir%\Explorer.exe".
B - You see a Tree of all Resources in this file, expand the "String Table"
C - Find the "start" and replace it with your own text. then press the [Compile Script] button.
D - Save "Explorer.exe" as "MyStart.exe" DONT save it as Explorer.exe, do "save as.." and give it a new name.
E - Quit "Resource Hacker".

Step 2:

A - Click on the [Start] button and choose the "Run..." item from the start menu. (Or use the shortcut key WinKey+R)
B - Type "RegEdit" in the Run "Dialog Box". And then press the [Ok] buton to run the "Registry Editor" program.
C - Go to: "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon" and find the "Shell" property.
D - Replace value of the "Shell" property to "MyStart.exe".
E - Quit "Registry Editor".
F - Restart your system.

Note about Registry Editor:
if you did not find the key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon", you can search the Registry for the "Explorer.exe", to do this use the Edit Menu | Find Next (Ctrl+F).

How to backup the windows registry

Before you edit the registry, export the keys in the registry that you plan to edit, or back up the whole registry. If a problem occurs, you can then follow the steps how-to restore the registry to its previous state.

How to Export Registry Keys

Click Start, and then click Run.

In the Open box, type regedit, and then click OK.

On the File menu, click Export.

In the Save in box, select the boxs at the bottom the bottom according to weather you want to export all or only selected branches of the registry.

Next select a location in which to save the backup .reg file. In the File name box, type a file name, and then click Save.

How to Restore the Registry

To restore registry keys that you exported, double-click the .reg file that you saved. 

How to add our own tips in windows

Are you sick of seeing the same tips again and again when you first logon to 

Windows? Now you can change them to whatever you want, whether it's quotes,

 jokes or a to-do list, anything is possible.

Open your registry and find the key below.

HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Tips

Create a new string valued named by incrementing the existing value names 

and set it to the required tip text.

how to Create a web page free

              How to Create a web page

CREATING A WEB PAGE ROLLOVER (IMAGE READY)

 

Use the following general workflow to create a set of rollover buttons.
You can make rollovers using layer-based slices or layer-based image maps.
1. Create the content for the Normal state. 
If you are creating a rollover button, start by creating the button as you want
it to look when the page is first loaded in a web browser. Make sure to put
each button in a set of rollover buttons in a separate layer so that you can create
a layer-based slice or image map.
If you plan to completely replace the contents of the Normal state (as opposed to modifying the layer’s style), create contents for other states in other layers.
2. If using image maps, make each button a layer-based image map.
Choose Layer > New Layer Based Image Map Area. You’ll need to add each state, including the first state. See To add a rollover state (ImageReady).
3.If using slices, make each button a layer-based rollover button.
Click the Create Layer-Based Rollover button on the Web Content palette. ImageReady creates an image-based slice and adds the Over state to the Web Content palette. See To create a layer-based slice for a rollover (ImageReady).
4.Add rollover states. 
Create additional rollover states as needed, or change the default Over state automatically created by the layer-based rollover button. See To add a rollover state (ImageReady) and To change a rollover state.
5.Edit the layer content for the state to create the rollover effect. 
Select the state you want to work with in the Web Content palette. You can apply and change layer styles for each state, change the position of content in each layer, or change the visibility of a layer. If you are replacing the contents of one layer with another, make the first layer invisible and the second visible for that state.
For more information on changes you can make to each state, see Editing layers in rollover states and animation frames (ImageReady).
You can use layer styles to create instant rollover effects. When working with layer-based slices, you can also save the series of states as a rollover style. 
If you are creating a remote rollover, target the remote slice to the selected state.
Use the Pickwhip icon in the Web Content palette to point to the slice that contains the image for the remote rollover. See To create a remote rollover 
6.Optimize the image.
Choose a file format for the image and set optimization options in the optimization palette. See To optimize an image for the web.
7.Preview the rollover. 
Preview the rollover in ImageReady as you create it. Then preview it in various web browsers used by your audience. See To preview rollovers (ImageReady).
8.Save the rollover.
Save a web version of your rollover using the File > Save Optimized command. Make sure that the output settings are set to save an HTML page along with the image files. ImageReady will write the JavaScript code for the rollover in the HTML page.